My printer (which is a couple of years old) has just come up with "122.02 Service Fuser Error".
I am a hands on guy and can easily dismantle and rebuild. Any suggestions as to what the problem is? Does it mean that I will have to buy a new 'Fuser' and is it easy to fit?
Nay help would be greatly appreciated.
Thanks
Terry
we have pre-print forms for invoices and the text is a little high on the printer how do i move the text lower on the page when it prints
Hi guys,
I had a firmware update go bad on a Lexmark C540 printer. The printer starts up with "900 Firmware Error"
Any idea if there is a low level firmware restore mode on this model (where you hold down a key while powering on) where I can reload the firmware? What are my options?
Right now, the computer doesn't see any device when connecting the printer via USB.
Any suggestions or does this involve me sending the printer into Lexmark which Id very much like to avoid. :-(
I reported this issue to Lexmark over a week ago and they haven't done a thing about it. Every driver I try to download is blocked because my AV finds Malware on their site. Is anyone else having this issue? I am unsure if this is a false positive or if Lexmark just doesn't care they may be distributing malware to customers
Lexmark Ms 310 Dn
Printer cant ready. after warming up, 2 light blinking, sometimes not blink (the last left and the second from right indikator light). sometimes all of indikators light together.
I had replace cartridge, photocunductor and cartridge's chip. on/off printer too. still the same problem.
what should I do?
I have a Lexmark Interpret S405 all-in-one. It prints fine, but the light bar inside the scanner unit jams when turned on. It travels to the right side of the unit. Once there, a loud clicking sound begins. How do I resolve issue?
About a month ago, we started seeing issues with printing legal sized documents to Lexmark printers. I've been able to duplicate this issue on various PC's using 3 different Lexmark printers. I cannot duplicate the issue on the same PC using an HP printer.
What happens when the printer is set to automatically select the tray, all legal documents are going to tray 1 which is the letter tray. This results in the last 2 1/2 inches of the document not getting printed. I've been able to get the legal document to print correctly by telling the program to print to tray 2 (legal) but we have one programs that doesn't give us the option to change the trays.
I have updated the firmware on these printers. I have also tried to download device specific drivers from Lexmark's driver page, but for all 3 printers, the only driver available is the...
Our Lexmark X654de MFP was failing to boot up and would give a blue screen with a 900.30 Firmware Error. I talked to Lexmark support and they walked me through some troubleshooting and finally said that the system board would need to be replaced, but the printer was no longer under warranty. We ended up getting a replacement system board (J0P04P) off of eBay. I replaced it today, but I am now getting a 950.09 NVRAM Mismatch error during boot.
After doing some Googling on the error, it looks like I need to either factory reset the printer or clear the NVRAM. The only instructions that I can find on Factory Reset involves going through the printers menu, which I can't because it won't boot completely. I haven't been able to Clear the NVRAM either because I haven't been able to find the right key combo to boot into a menu to do it.
The...
Hello,
I have a few Lexmark E260DN's that will stay on for days or weeks without being used. Then they just start randomly restarting. All of the lights on the control panel light up in sequence, it starts to turn, and then repeats the same thing over again until it is powered off. Then after they are powered on, they will work. I had one that I printed over 300 pages without an issue. I let it sit for an hour, I sent a job, and it jammed after about 30 pages. I tried again, and it printed about 15 pages, then 7, then 1. What could possibly be wrong with these printers? They all have about a 20,000 page count. I've tried different toners/photo conductors, USB cables, Network cables, drivers, and computers. The issue follows these printers.
After 5+ years of service, one of our C544dn printers finally gave up. The C544dn is no longer available, so I'm looking for the new version. I had a vendor say that the C4150 B&W / Color was the newest thing, but I can't find anything that necessarily confirms that it is the new C544dn. Does anyone have any ideas on this?
Will Lexmark M5155 auto select MP Tray if paper is in mp tray?
I have a Lexmark 705 Pro printer which used to work perfectly on the first release of Windows 10.
However, I now need to reinstall to activate on a replacement Wireless Modem/Router.
Windows now refuses to run the installation disc, saying obsolete and does not even see the printer on USB cable.
Any suggestions???
I probably have a fairly unique situation here. I have had a Lexmark CX510de for a couple of months now. I work from home and the printer is probably a bit of overkill but the whole family also want to use it.
I have two phone lines with fibre broadband on each, with different providers. I fix PC's and do a lot of updates downloading when I do PC factory resets. There is also a lot of TV streaming goes on in our house as well. I tend to use one network and everyone else uses the other.
So, the CX510de is connected to one network, the one I use most. However other people in the house want to be able to print but their devices are usually on the other network.
I know I could use port forwarding on the router and print via the internet but would prefer not to do this for security reasons, and I am not keen on using a VPN either. Other users...
hi, please how to setup for print copy id on lexmark x656de???
:-((((((
I'm wondering if anyone else has seen an instance where the MAC of the printer randomly changes over to an unknown MAC. We typically see the 0021.b7xx.xxxx MAC on the port, but recently when deploying dot1x to our ports we noted where Lexmark printers (MS510dn, MS811, MX911) are connected, a MAC of eeee.3eee.xxxx will appear and the port will issue a dot1x failure, disabling the port. The MAC will revert back to the Lexmark MAC of 0021.b7xx.xxxx and everything is good. Just wondering what would cause this.
Hi All,
One of our Lexmark MS810 printers has started printing the pages totally black. I replaced the Fuser, Imaging Unit, and Toner cartridge and it is still happening. Anyone have any other thoughts on what it could be? I hate calling lexmark support.
Lexmark Print Management 'Version 2.3.15' Log Files Fill the Hard Disk Drive and Overwhelm the LPM Server
Overwhelm? Is that like the zombie herd climbing a wall in WWZ?
We have a number of these printers that were bought used (along with T620 and T632s), and almost all of them have a password set on them. I have searched on this and found a few recommendations of things to try (such as a password clear jumper), but nothing that seems to work for this specific model.
What will be the possible fix into this problem? It happens occasionally and it will just paper jam on the Fuser and under the toner.
